Orbit Flow 40 - Target Software vB0.01.PN.00r11
11/08/2026

Improvements:
	- All pins move to up when device goes to sleep mode.

--------------------------------------------------------------------------------------------------------------------------------------------------
Orbit Flow 40 - Target Software vB0.01.PN.00r10
06/08/2026

Improvements:
	- Disable menu setting command in BIST mode and PCB test mode.
	- Set PID as Pine in HID Braille mode and set PID as OR20 in HID Orbit mode.

--------------------------------------------------------------------------------------------------------------------------------------------------
Orbit Flow 40 - Target Software vB0.01.PN.00r09
06/08/2026

Improvements:
	- Added All up down pin pattern in BIST mode.

--------------------------------------------------------------------------------------------------------------------------------------------------
Orbit Flow 40 - Target Software vB0.01.PN.00r08
03/08/2026

Improvements:
	- Update USB descriptor for max power while enumeration.

--------------------------------------------------------------------------------------------------------------------------------------------------
Orbit Flow 40 - Target Software vB0.01.PN.00r07
24/07/2026

Improvements:
	- Update Firmware for new Hardware version v1.1

--------------------------------------------------------------------------------------------------------------------------------------------------
Pine - Target Software vB0.01.PN.00r06
15/05/2026

Improvements:
	- Update VID/PID values as per Orbit Flow product.

--------------------------------------------------------------------------------------------------------------------------------------------------
Pine - Target Software vB0.01.PN.00r05
14/05/2026

Improvements:
	- Fixed Initial message display issue while mode switching between HID Orbit and HID Braille.
	- Added support for BIST mode and PCB test mode using Key commands.
	- Fixed: Key command issues while switching between modes.

--------------------------------------------------------------------------------------------------------------------------------------------------
Pine - Target Software vB0.01.PN.00r04
21/04/2026

Improvements:
	- Added HID Orbit Screen Reader functionality.
	- Screen Reader mode switch between HID Braille and HID Orbit using key combination and menu settings.

--------------------------------------------------------------------------------------------------------------------------------------------------
Pine - Target Software vB0.01.PN.00t03
07/04/2026

Improvements:
	- Fixed: Pan keys and Thumb keys 1 and 4 were not working as per the HID Braille key mapping.

--------------------------------------------------------------------------------------------------------------------------------------------------
Pine - Target Software vB0.01.PN.00t02
06/04/2026

- First Release

	The Pine uses the standard HID-Braille protocol to communicate with screen readers over USB. This is the device’s default factory setting.
	When connected via USB, it displays "Screen Reader Not Connected" on the Braille display if no screen reader is detected.

	Key Mapping with HID-Braille
	When HID-Braille is in use, the key mapping should be as follows when sending HID descriptors to screen readers:
	Thumb key 1 – Braille pan left
	Thumb key 2 – Braille D-pad up
	Thumb key 3 – Braille D-pad down
	Thumb key 4 – Braille pan right
	Home key – SPACE + dots 1-2-5
	Left top pan key – Braille rocker up
	Left middle pan key – Braille pan left
	Left bottom pan key – Braille rocker down
	Right top pan key – Braille rocker up
	Right middle pan key – Braille pan right
	Right bottom pan key – Braille rocker down
	Cursor keys 1–40 – function as cursor routing keys
